Millwork / Furniture - Solvents - Acetone

  • Product Description
  • Physical Properties
  • Application Data
  • Directions for Use
  • Technical Literature

Product Code:

4T003

Product Description and Uses:

Schwartz Acetone is a high quality solvent for reducing fiberglass resin, cleaning fiberglass tools, thinning two-part epoxies and cyanoacrylate glue (superglue) before hardening.

It is a good solvent for polyester resins, vinyl and acrylics.

It also functions as degreaser for preparing metals for finishing and to clean rosin flux in soldering applications.

Product Advantages:

  1. High quality.
  2. Fast-evaporating.
  3. Excellent clarity.
  4. Active solvent to a wide variety of thermoplastics.

Standard Container Sizes

205L Drum

18.9 Litre Pail

Physical Properties:

Flash Point:

-18°C

Density:

0.792 g/ml

Appearance:

Clear, colourless

Solubility in Water:

Complete

Shelf Life:

3 years unopened

Environmental Information:

VOC: zero

Suggested Uses:

Use for thinning/dissolving fiberglass resins, two-part epoxies, polyesters, vinyls, acrylics, polystyrene and polycarbonate.

To clean these plastic surfaces, dilute with water to reduce its strength.

Cleans adhesive residue on glass surfaces.

Mixing Ratio:

NA

Dry Time:

Evaporates quickly.

Clean-up Solvent:

NA

Reducer:

NA

Retarder:

NA

Pot Life:

NA

Surface Preparation:

NA.

Application:

Use in well-ventilated area.

Ambient Conditions:

NA.

Storage:

Store indoors at room temperature, away from heat, ignition sources, open flames and direct sunlight.

Warning:

Avoid sparking, use non-sparking tools.

Avoid open flames, turn off all pilot lights, ensure that work area is properly ventilated.

Soiled rags and waste products may contain combustible liquids or vapours, dispose in accordance with local regulations.

Refer to MSDS for information on safe use of this product.


For SDS and Technical Literature please call or e-mail us at;


Tel: 905-683-0411 | Toll Free: 1-866-519-9674
Email: info@schwartzchem.com