Plastic Adhesives & Cements - Rez-N-Kleen A.S.

  • Product Description
  • Physical Properties
  • Application Data
  • Directions for Use
  • Technical Literature

Product Code:

17T2

Product Description and Uses:

Schwartz Rez-N-Kleen A.S. is an effective cleaner for acrylics and polycarbonate.

It removes hand prints, dirt and grease without leaving a residue for a streak-free surface.

It is specially formulated with anti-static additive to minimize accumulation of dust particles on cleaned surfaces.

Product Advantages:

  1. Effective cleaner without attacking acrylic and polycarbonate.
  2. Leaves no residue for a streak-free surface.
  3. Contains anti-static additive to reduce dust accumulation.
  4. Fast-dry.

 

Standard Container Sizes

205L Drum

18.9 Litre Pail

3.78 Litre (Gallon)

Physical:

Flashpoint:

11°C

Density:

0.79 g/ml

Appearance:

blue liquid

Solubility in Water:

complete

Shelf Life:

3 years unopened

Environmental Information:

VOC: 790 g/L

Suggested Uses:

For cleaning surfaces of acrylic and polycarbonate plastics.

Dry Time:

Evaporates quickly.

Mixing ratio:

NA

Pot Life:

NA

Reducer:

NA

Retarder:

NA

Clean-up Solvent:

NA

Surface Preparation:

NA.

Ambient Conditions:

NA.

Application:

Use in well-ventilated area.

Damp a clean, lint-free rag with Rez-N-Kleen A.S. and wipe surface.

Storage:

Store indoors at room temperature, away from heat, ignition sources, open flames and direct sunlight.

Warning:

AVOID sparking, use non-sparking tools.

Avoid open flames, turn off all pilot lights, ensure that work area is properly ventilated.

Soiled rags and waste products may contain combustible liquids or vapours, dispose in accordance with local regulations.

Refer to MSDS for information on safe use of this product.

 


For SDS and Technical Literature please call or e-mail us at;


Tel: 905-683-0411 | Toll Free: 1-866-519-9674
Email: info@schwartzchem.com