Millwork / Furniture - PDQ Stripper Gelled

  • Product Description
  • Physical Properties
  • Application Data
  • Directions for Use
  • Technical Literature

Product Code:

N46C7

Product Description and Uses:

Schwartz PDQ Stripper Gelled is a fast-acting paint, varnish, enamel and lacquer stripper.

It penetrates quickly even on layers of coating and intricate details on furniture.

It has an excellent gel structure that does not drip so it clings to the surface making it a very effective paint stripper especially on vertical surfaces.

Product Advantages:

  1. Fast acting.
  2. Aggressively penetrates layers of coating.
  3. Effectively clings onto any vertical surfaces to ensure better stripping even on hard to reach areas.
  4. Safe to use in fine furniture and antiques.

Standard Container Sizes

205L Drum

18.9 Litre Pail

Physical Properties:

Viscosity:

3000 - 4000 cps

Density:

1.13 g/ml

Appearance:

Cloudy liquid

Shelf Life:

2 years unopened

Environmental Information:

VOC: 685 g/L

Suggested Uses:

Used to strip a wide variety of coatings and finishes on wood, metal, glass, fiberglass, plaster, and masonry.

Tools:

Eye protection, heavy-duty gloves, brush, paint scraper, steel wool, lint-free cloth, drop cloth or newspaper.

Mixing Ratio:

NA

Dry Time:

Very slow solvent, slower than n-butyl acetate.

Clean-up Solvent:

4T100 Lacquer Thinner

Reducer:

NA

Retarder:

NA

Pot Life:

NA

Preparation:

Remove any plastic and rubber materials on items to be stripped.

Prepare all tools required.

Application:

Protect floor with drop cloth.

Apply PDQ Stripper Gelled generously by brush.

Allow to penetrate for 10-20 minutes until coating has bubbled and lifted.

Remove softened coating by scraping off with a putty knife or scraper and steel wool.

For porous substrates like masonry, use a stiff brush instead.

Clean area with lint-free cloth dampened with stripper to remove traces of loosened coating or paint.

Finally, clean area with lint-free cloth dampened with 4T100 Lacquer Thinner to remove all residues.

Wait 24 hours before refinishing.

Ambient Conditions & Precautions:

Use in a well-ventilated area.

Always wear eye protect and heavy-duty gloves at all times.

Do not get in contact with skin.

Storage:

Store indoors at room temperature, away from heat, ignition sources, open flames and direct sunlight.

Warning:

Do not breathe in fumes.

Avoid open flames, turn off all pilot lights, ensure that work area is properly ventilated.

Dispose all soiled rags in accordance with local regulations.

Refer to MSDS for information on safe use of this product.


For SDS and Technical Literature please call or e-mail us at;


Tel: 905-683-0411 | Toll Free: 1-866-519-9674
Email: info@schwartzchem.com