4T113
Schwartz Brass Lacquer Thinner is a high quality solvent blend used as retarder/reducer for 34C113 Schwartz Acrylic Brass Lacquer to prevent application problems like dry spray and film defects associated with fast drying like orange peel.
4T113 can also be used with Schwartz 1C352 and 1C373 Brass Lacquers.
205L Drum
18.9 Litre Pail
Flash Point: |
27°C |
Density: |
0.924 g/ml |
Appearance: |
Clear, colourless |
Shelf Life: |
3 years unopened |
VOC: 924 g/L
Suggested Uses: |
Used for retarder/reducer for Schwartz 34C113, 1C352, 1C373 and acrylic-based lacquer finishes. |
Mixing Ratio: |
NA |
Dry Time: |
Slower than 4T100 Lacquer Thinner. |
Clean-up Solvent: |
NA |
Reducer: |
NA |
Retarder: |
NA |
Pot Life: |
NA |
NA.
Use in well-ventilated area.
NA.
Store indoors at room temperature, away from heat, ignition sources, open flames and direct sunlight.
Avoid sparking, use non-sparking tools.
Avoid open flames, turn off all pilot lights, ensure that work area is properly ventilated.
Soiled rags and waste products may contain combustible liquids or vapours, dispose in accordance with local regulations.
Refer to MSDS for information on safe use of this product.
Tel: 905-683-0411 | Toll Free: 1-866-519-9674
Email: info@schwartzchem.com